Welcome to Monarch Aluminium

Monarch Aluminium have been in business over 25 years supplying the Canterbury region and beyond.

Our competent team specialise in high end architecturally designed homes, working with Architects, designers, & home owners.  From family homes to light commercial, Monarch have a reputation for quality workmanship and service.

For more information on our product range, visit the VANTAGE website

Monarch Aluminium are proud suppliers to:

Ryman Healthcare

Introducing ThermalHeart+®

Play Video

Did you know 35-50% of a home’s heat is lost from its windows and doors?

Introducing ThermalHeart+®, a range of code-meeting, industry-leading, thermally efficient products designed and made right here in New Zealand for exactly how we live.

Contact us to discuss your options, or visit the website to learn more about the ThermalHeart+® range.

ThermalHeart+®️ components

The ThermalHEART® polyamide barrier insulates the frame of the window system, separating warm and cold areas. Using clean, modern lines, these frames provide high performance in extreme weather conditions.  ThermalHEART® frames deliver almost double the thermal performance of standard aluminium windows and doors1

Explore ranges

High performance glass

Glass can enhance the way your home looks and feels, but it also adds to the warmth and thermal efficiency of your home. Using high performance glass with low emissivity (Low-E) coating can reduce heat loss in winter and over-heating in summer. It protects your home's interior while providing a similar clarity to clear glass.

The Centrafix™ installation method recesses the joinery into the building wall, aligning the insulation elements - wall, window frame, glazing – to prevent cold air from circulating around the frame. This New Zealand designed innovation increases the thermal performance in your home by over 20%(see here for technical details).

Discover Centrafix™

1 Comparison figures are based on complete thermal modelling of an average house lot of Metro Series ThermalHEART® products with The AGP System™ double glazing using the WEERS modelling methodology. The benchmark figures were calculated by modelling the same average house lot of products using the equivalent non-thermally broken products glazed with standard double glazing. A “standard aluminium window or door” refers to a non-thermally broken aluminium frame with standard double glazing.

2 Centrafix™ comparison figures are based on complete thermal modelling of an average house lot of products installed in 90mm timber framing. The standard installation benchmark was calculated by modelling the same house lot of comparable products using a typical E2/AS1 cavity construction installation on 90mm timber framing.

If thermal efficiency is among your top priorities, Klima® is a smart bet

Based on a premium series from Europe by Kömmerling and designed and manufactured in New Zealand to suit Kiwi conditions, Klima® is the ultimate energy-efficient window and door solution. From November 2023, the minimum insulation requirements for cooler climate zones increased to the final performance requirements, as outlined in the H1 Clause of the New Zealand Building Code. Klima® exceeds the highest standard for each zone, so you can feel confident knowing you’re ahead of the game.

Key features of Klima® include:

  • A maximum 6 energy stars under WEERS (Window Energy Efficiency Rating System) when used with high performance glazing
  • State-of-the-art multi chamber design
  • Seamless welded corners for extra strength
  • Super thick profiles for maximum thermal insulation, high quality weather resistance, and strength in high wind zones
  • Available in a standard range of windows and doors, with the exception of a bi-fold format
  • Aligns with standard industry installation practices for ease of installation
Why choose Klima®?
  • Thermal efficiency – a thermally efficient home can be cheaper to warm compared to one built to code
  • Healthier Home – an affordable investment to create a healthy home that is warm, comfortable, and dry
  • Noise Reduction – Klima® offers excellent levels of noise reduction
  • Durability – thanks to the highly durable nature of uPVC, Klima® shows no sign of degrading or discolouring

For more information, view the Klima® brochure or visit the website here.  

Choose the right colour and surface finish for you

It is important that you choose the right product for the right application to ensure the life of your surface finish, and in some cases that your windows and doors are covered under their warranty.

Our powdercoat colours are proudly supplied by Dulux Powdercoatings.

Powdercoating

Duralloy® +PLUS is designed for:

  • Residential buildings and light commercial, less than 4 levels
  • Properties greater than 10 metres from high tide level.

Offers a 15 year film and colour integrity warranty.

Popular Colours

Duralloy +PLUS

Appliance White Matt 20S1364M

Arctic White Matt 20S1358M

Black Matt 20S9041M

Canvas Cloth Matt 20S7830M

Charcoal Matt 20S9219M

Flax Pod Matt 20S9218M

Ghost Grey Matt 20S7829M

Gravel Matt 20S7824M

Grey Friars Matt 20S7809M

Ironsand Matt 20S8383M

Karaka Matt 20S6446M

Lichen Matt 20S6449M

Matt Permanent Green 20S6540M

Matt Silver Pearl 21P7831M

Metro Coal Dust Matt 20S7807M

Metro Electric Cow Matt 21P8395M

Mist Green Matt 20S6475M

New Denim Blue Matt 20S5392M

O’Keefe Grey Matt 20S7868M

Off White Matt 20S3240M

Palladium Silver Matt 21P7136M

Sandstone Grey Matt 20S7807M

Scoria Matt 20S4382M

Slate Blue Matt 20S5403M

Titania Matt 20S2249M

Warm White Pearl Matt 21P1367M

Window Bronze Matt 21P8394M

Windsor Grey Matt 20S7823M

Protexture

Protexture Appliance White Flat 20T1274F

Protexture Arctic White Flat 20T1342F

Protexture Black Flat 20T9215F

Protexture Charcoal Flat 20T9081F

Protexture Flaxpod Flat 20T9225F

Protexture Grey Friars Flat 20T7167F

Protexture Ironsand Flat 20T8406F

Protexture Metro Silver Pearl Flat 21T7852F

Protexture Sandstone Grey Flat 20T7156F

Protexture Titania Flat 20T2068F

Protexture Warm White Pearl 21T2075F

Protexture Windsor Grey Flat 20T7590F

Colour Selection Tips

  • For a joinery colour that complements the house cladding it is common to choose a tone a few shades up or down from the cladding colour
  • Choosing the same colour as the house can give a very clean look, especially in white or cream tones
  • Remember, however, that the colour of joinery you choose now may limit options in the future if you want a change of house colour
  • Contrasting joinery colours are popular and darker natural tones, silver and black are often chosen
  • Dark or black joinery against a light coloured house, especially in a plaster finish, can look very sharp and attractive
  • Matching the joinery colour to the roof or fascia for a unified look is also popular
  • It is important to remember that the joinery colour impacts on the inside view and so can influence interior colour schemes. A good option can be to choose a neutral joinery colour that preserves flexibility for interior selections e.g white, cream, grey, taupe, black or silver
  • Consider the environmental and site conditions of your property and ensure that the powdercoat product you choose is fit for purpose
  • When you make your final colour selection, use an aluminium colour swatch and assess it in natural light.

Revitalise your home with new windows and doors

Are your windows and doors are letting in a draught, not locking properly, water damaged, noisy, or not as aesthetic as you'd like?

Whether you're undertaking a full home renovation or prioritising changes to your home that will have the biggest impact, updating the windows and doors in your existing home is a proven way to increase the comfort, aesthetics, and value of your home.

Say goodbye to the poor performance and on-going maintenance of your aging joinery. New windows and doors can change the way light, sound, and fresh air move in and out of your home.

When it comes to upgrading the windows and doors in your home, there are two options we can custom make for your needs, each with their own benefits. 


Update Options

Replacement windows and doors

Replacement windows and doors

Existing joinery is removed entirely and a new window or door and framing structure is installed allowing you to completely change the colour, style and configuration.

Replacement windows may be a good option if:

  • You’d like to completely change the size and shape of your windows and doors
  • Your window frames or sills are in poor condition or show signs of rot
Insert windows

Insert windows

In this method, a new window is inserted into the existing timber window frame allowing you to update the colour and configuration of your windows while retaining the character of your home with minimal disruption to your home.

Insert windows may be a good option if:

  • Your wooden joinery is a bit draughty, stiff to open and close but in reasonable condition
  • You’d like to retain the existing character of your house
  • You’d like to improve the function and thermal performance of your joinery

Update for a warmer, healthier, more efficient home

Updating your windows and doors is an opportunity to bring the thermal performance of your joinery up to current building code standards and enjoy a healthier home.

A healthy home is warm, comfortable, and cost efficient to run with minimal impact on the environment, not to mention your family will experience greater wellbeing and productivity.

In order to achieve a healthy home, thermally efficient design and product choice are important; consider thermally efficient windows and doors like:

Sustainability Accreditations

Being part of the country's largest supply chain of manufacturing windows and doors, we believe we have a responsibility to improve the way we do things and reduce our environmental impact.

We're proud to supply product from APL Window Solutions, our ranges meet a number of sustainability benchmarks.

Learn more about APL's sustainability initiatives.

Contact Us

Monarch Aluminium

12 Maces Rd, Bromley, Christchurch, Christchurch